You are here: Home / Programs of Study / All Programs (A-Z) / Automotive Technology / Course Tool List

Course Tool List

Course Tool List for Automotive Technology Courses

Suggested Minimum Requirements

  • 1/4 Inch Square Drive:
    • Six Point Standard Sockets (5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2)
    • Six Point Metric Sockets (4, 5, 6, 7, 8, 9, 10, 11, 12, 13)
    • Drive Tools (1/4”):
      • Ratchet
      • 1 1/2” extension
      • 3” extension
      • 6” extension
      • Universal joint
  • 3/8 Inch Square Drive:
    • Six Point Standard Sockets (5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16)
    • Six Point Metric Sockets (8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21)
    • Six Point Metric Deep Sockets (8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19)
    • Hex Bit Standard Sockets (5/32, 3/16, 7/32, 1/4, 5/16, 3/8)
    • Hex Bit Metric Sockets (4, 5, 6, 7, 8, 10)
    • Torx Bit Sockets (T-15, T-20, T-25, T-30, T-40, T-45, T-50) Note: Smaller sizes may be 1/4” drive
    • Spark Plug Sockets (5/8, 13/16)
    • Drive Tools (3/8”)
      • Ratchet
      • 3” extension
      • 6” extension
      • 3/8” to 1/2” drive adapter
      • Universal joint
  • 1/2 Inch Square Drive
    • Six Point Standard Sockets (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1)
    • Six Point Metric Sockets (9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21)
    • Six Point Standard Deep Sockets (1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1)
    • Six Point Metric Deep Sockets (15, 16, 17, 18, 19, 21, 22)
    • Drive Tools (1/2”)
      • Ratchet
      • 2” extension
      • 6” extension
  • Wrenches:
    • Standard Combination Wrenches (1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1)
    • Metric Combination Wrenches (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19)
    • Standard Flare Nut Wrenches (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8) Note: Each wrench may combine two sizes
    • Metric Flare Nut Wrenches (9, 10, 11, 12, 13, 14, 15, 17) Note: Each wrench may combine two sizes
  • Screwdrivers:
    • Slotted Screwdrivers (1/8”x4”, 1/4”x4”, 3/16”x4”)
    • Phillips Screwdrivers (#0x2.5”, #1x3”, #2x4”)
  • Pliers
    • Arc Joint, 10”
    • Diagonal Cutting, 6”
    • Long Nose, 6”
    • Slip Joint, 6”
    • Inside Snap Ring
    • Outside Snap Ring
    • Wire Stripper/Crimper
  • Miscellaneous:
    • Safety Glasses, ANSI Z-87.1
    • Inspection Mirror
    • Magnetic Pick-Up Tool
    • 12VDC Test Light
    • 12 oz. Ball Peen Hammer
    • Locking Tool Box
    • Automotive Digital Volt/Ohm Meter (DVOM)